产品导航
Products 
德国达威力|STAHLWILLE
法国FACOM/CU.AE56线站集
| 法国FACOM/CU.AE56线站集 |
| 维修发动机配件，机身，电气设备和电路。 |
| •158工具。 |
| D：16,26公斤。 |
| Qty Description |
| STG 5 File set |
| RB.40AU 10 Sockets 3/16” to 9/16” |
| R.240A 1 1/4” universal joint |
| R.232 1 Coupler 1/4”- 3/8” |
| R.236A 1 Short-reach spinner handle |
| R.235 5 Bit-holder 1/4” |
| R.217 1 1/4” extension 250 mm long |
| R.215 1 1/4” extension 150 mm long |
| R.210 1 1/4” extension 100 mm long |
| R.155A 1 1/4” metal-grip “palm-control” ratchet |
| R.140A 1 Drive-hinged handle 1/4” |
| R.120A 1 Sliding tee |
| JL.40U 10 “Junior” long-reach sockets 1/2” to 9/16” |
| JB.41AU 5 Sockets 5/8” to 7/8” |
| JB.40AU 6 Sockets 1/4” to 9/16” |
| J.240A 1 3/8” universal joint |
| J.230 1 Coupler 3/8”-1/4” |
| J.215 1 “Junior” extension 250 mm |
| J.210 1 “Junior” extension 125 mm |
| J.155A 1 3/8” metal-grip “palm-control” ratchet |
| J.145 1 Metal-grip hinged handle |
| J.120A 1 “Junior” sliding tee |
| J.115 1 Metal-grip speed brace |
| AS.6L160T2A 6 Needle file wallet set |
| ARZ.5,5 1 Round blade offset screwdriver |
| APZ.B 1 Dual-size offset screwdriver |
| ANP1X35 1 Stubby screwdriver for Phillips® headsJ 1 |
| AWP 2 Screwdriver for PhillipsJ heads 1 - 2 |
| ANP0X75 1 Screwdriver for Phillips® heads 0 |
| AW 3 Screwdrivers for slotted heads 4x100 - 5.5x150 and 6.5x150 |
| AN 4 Stubby screwdrivers 4x35 - 6,5x3 - 2x75 - 3x75 mm |
| 882A 1 Scroll shears |
| 85.JU10 10 Wallet set of hexagon keys 33 to 183 mm |
| 884.S18 1 18 mm snap-off blade cutter |
| 841A.4 1 Bi-material electricians scissors |
| 840.1 1 Electricians knife with wire stripper |
| 827.1 1 Ultra-slim magnetic retrievers |
| 826.1 1 Mechanical retriever |
| 82H.JU10 10 Wallet set of hexagonal keys 1/16” to 3/8” |
| 805.1 1 Vernier caliper to 1/10 mm |
| 803.300M 1 Flexible stainless 2-sided rule |
| 64 6 Ring wrenches : 1/2x9/16” - 1/4x5/16” - 3/4x13/16” - |
| 3/8x7/16” - 5/8x11/16” - 7/8x15/16” |
| 668B.12 10 Pack of ten 12 teeth/cm bimetal blades |
| 445.10R 1 Locking-wire pliers |
| 440.JU12 12 Combination wrenches 1/4” to 15/16”. |
| 192.16CPE 1 “Piano wire” diagonal cutters |
| 256.4 1 4 mm precision centre punch |
| 263.G19 1 Chisel |
| 248.JT7 7 Long drift punches 2 to 10 mm |
| 22.JU5T 5 Roll set of miniature open-end wrenches 3/16” to 9/16” |
| 208A.40CBA 1 Heavyweight series adaptable tip mallet |
| 200H.32 1 Graphite handle riveting hammer |
| 193.16CPE 1 Sheathed straight half-round nose “telephone” pliers |
| 188.16CPE 1 Sheathed flat-nose pliers |
| 1830.1 1 Extra-soft silk brush |
| 180.CPE 1 Multigrip plier |
| 142.1 1 Straight-shouldered tweezers |
| 113A.10C 1 10” adjustable wrench |
| 893.316 1 Case tape measure 3m |
| 804 1 19 blade feeler gauge |
| 603F 1 Hacksaw frame |
| 500 1 Lock-grip pliers |
| 376A 1 Manual oil syringe |
| 234 1 Scriber |
| 163 1 Wire stripper and cutter |
| 154 1 Straight tweezers |
| JB.11/32 1 Sockets |
| ES.T 5 Bits 101 - 102 - 134 - 136,5 - 148 |
| 更多产品选择及技术咨询 |
| 热线：4000-343-885 |
| 邮箱：Nahe001@hinahe.com |